What is the difference between different mesh number
2 min
In the context of bead blasting in CNC services, the terms "80 mesh," "100 mesh," "120 mesh," and "150 mesh" refer to different grit sizes or particle sizes of the blasting media used in the process. The mesh size indicates the number of openings per linear inch in a sieve through which the blasting media passes. Here's a general overview of the differences:
80 Mesh:
Larger particle size.
Removes heavy coatings, rust, and contaminants more aggressively.
Leaves a coarser finish on the material being blasted.
Suitable for applications where surface roughness is acceptable or even desired.
100 Mesh:
Medium particle size.
Balances between aggressiveness and surface finish.
Effective for general-purpose cleaning and preparation.
Provides a compromise between the coarser 80 mesh and the finer options.
120 Mesh:
Smaller particle size.
Removes lighter coatings and contaminants.
Offers a smoother surface finish compared to coarser grits.
Suitable for applications where a finer finish is desired.
150 Mesh:
Fine particle size.
Removes very light coatings and provides a smoother surface.
Ideal for applications where a high-quality, polished finish is required.
Used for precision cleaning and finishing.
The choice of mesh size depends on the specific requirements of the project, including the material being blasted, the desired surface finish, and the level of precision needed. Finer mesh sizes generally result in smoother finishes but may take longer to achieve the desired cleaning or texturing effect. It's essential to consider the material's sensitivity to abrasion and the final aesthetic or functional requirements of the part being processed.
Popular Articles
• How to choose between Laser marking and UV printing?
• Anodizing vs. Hard Anodizing: The Differences in Surface Treatment Techniques
• What is Bead Blasting Finish in CNC? A Complete Guide
• Surface Finish in Machining, Types, Charts & Testing
• Explanation of different material surface treatment technologies in CNC machining
Keep Learning
How to Anodize Aluminum: Complete DIY & CNC Manufacturing Guide
Key Takeaways Anodizing grows an oxide layer from the aluminum itself instead of adding a separate coating on top. Type II anodizing is commonly chosen for appearance-focused parts, while Type III hardcoat anodizing is used more often on sliding or wear-prone components. Surface condition before anodizing still shows afterward. Tool marks, scratches, bead blasting, and polishing all remain visible. Hole sizes, thread fit, and sliding clearances can change after anodizing because the oxide layer grows ......
Sulfuric Acid Anodizing for Aluminum in CNC Manufacturing
Key Takeaways About Sulfuric Acid Anodizing Sulfuric acid anodizing is the most widely used anodizing process for CNC-machined aluminum parts. The process creates an integral oxide layer that improves corrosion resistance, wear resistance, and surface appearance. Coating thickness affects both performance and dimensional growth, making tolerance planning important for precision components. Aluminum alloy selection influences anodizing quality, color consistency, and final surface appearance. Type II s......
Abrasive Blasting Process for CNC Machined Components: Technical Best Practices
Key Takeaways Abrasive blasting propels media at metal surfaces to clean, texture, or prep them, the process changes depending almost entirely on what media you use and how hard you throw it. Industrial abrasive blasting isn't one process, sandblasting, bead blasting, shot blasting, grit blasting all use the same principle and produce completely different surface conditions. In most applications, media selection has a greater influence on the final surface condition than blasting pressure or nozzle co......
Metal Polishing Process for CNC Machined Parts and Surface Finishing
Key Takeaways Metal polishing is a surface finishing process that improves the smoothness, appearance, and functional properties of CNC machined metal parts through progressive abrasive material removal. The metal polishing process removes surface peaks, tool marks, and micro-defects to produce surfaces ranging from matte satin to mirror finish. CNC metal polishing removes material and can affect part dimensions, so it must be accounted for on close-tolerance features. Different metals respond differe......
Electropolishing Explained: Process, Surface Finish, and Stainless Steel Applications
Key Takeaways Electropolishing is an electrochemical process that removes material from metal surfaces by anodic dissolution, preferentially attacking microscopic surface peaks to produce a smoother, brighter, and more corrosion-resistant surface. Stainless steel electropolishing is the most common industrial application, used in medical, pharmaceutical, food processing, and aerospace manufacturing. A properly controlled electropolishing process can often reduce Ra surface roughness by around 30-50% o......
Vibratory Finishing for CNC Parts: Process, Media, and Deburring Methods
Key Takeaways Vibratory finishing is a batch surface treatment process that uses vibrating abrasive media to deburr, smooth, and polish CNC machined parts simultaneously. The vibratory finishing process works on large batches without operator attention during the cycle. Media selection is the primary variable controlling whether you get aggressive deburring, surface smoothing, or high-shine vibratory polishing. Vibratory deburring removes burrs and sharp edges consistently across complex geometries th......